Michigan Well Data › Alcona County
Alcona County, Michigan: well depth, water level & drilling cost
✓ 6,175 Wellogic records · verified 2026-06-29
How deep are wells in Alcona County, Michigan?
The median drilled well depth in Alcona County is 73 ft, based on 6,141 wells with recorded depths in the state Wellogic database. Half of all wells fall between 50 ft and 109 ft; 90% are shallower than 152 ft. Wells drilled since 2016 have a median depth of 80 ft.
How much does it cost to drill a well in Alcona County?
Applying published per-foot rates to the local median depth of 80 ft: drilling and casing alone typically runs $2,000–$5,200; a complete system including pump, pressure tank, and hookup typically runs $4,800–$8,000. Actual quotes depend on site access, geology, and casing requirements.
What is the static water level in Alcona County?
The median static water level is 26 ft below ground surface (middle half of wells: 10 ft–53 ft), from 5,749 measurements.
How much water do wells in Alcona County produce?
The median tested yield is 15 gpm (middle half: 12 gpm–22 gpm), from 5,816 pump tests. A typical household needs 5–10 gpm.
Pull every recorded well near a Alcona County address — $19
Drilled depth distribution
Who drills wells in Alcona County?
Drillers by number of wells completed in this county since 2016, per filed well records (EGLE Wellogic); shown by registered well-driller number.
| Driller | Wells since 2016 |
|---|---|
| Lic. #35-2137 | 356 |
| Lic. #01-2323 | 141 |
| Lic. #35-2190 | 95 |
| Lic. #65-1622 | 63 |
| Lic. #01-1278 | 61 |
| Lic. #01-2349 | 58 |
| Lic. #04-1920 | 51 |
| Lic. #04-2580 | 50 |
Get quotes from local drillers
See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.
Free lookup Property report — $19Well records by ZIP code in Alcona County
Median depth, water level, and yield for each ZIP code with recorded wells.
- Harrisville (48740) — 912 wells, median 73 ft
- Glennie (48737) — 884 wells, median 90 ft
- Hubbard Lake (49747) — 820 wells, median 85 ft
- Lincoln (48742) — 775 wells, median 76 ft
- Spruce (48762) — 656 wells, median 74 ft
- Greenbush (48738) — 624 wells, median 43 ft
- Mikado (48745) — 428 wells, median 68 ft
- Curran (48728) — 392 wells, median 87 ft
- Barton City (48705) — 381 wells, median 63 ft
- Black River (48721) — 255 wells, median 114 ft
Method: medians computed from Wellogic records (water-supply wells only (household, irrigation, industrial, Type I/II/III public supply) — heat-pump, test and unclassified wells excluded; depths 0–5,000 ft). Cost estimate applies published per-foot ranges (checked 2026-06-11) to the local median depth — full methodology & sources.