Michigan Well Data › Gratiot County
Gratiot County, Michigan: well depth, water level & drilling cost
✓ 7,041 Wellogic records · verified 2026-06-29
How deep are wells in Gratiot County, Michigan?
The median drilled well depth in Gratiot County is 110 ft, based on 7,013 wells with recorded depths in the state Wellogic database. Half of all wells fall between 77 ft and 167 ft; 90% are shallower than 290 ft. Wells drilled since 2016 have a median depth of 116 ft.
How much does it cost to drill a well in Gratiot County?
Applying published per-foot rates to the local median depth of 116 ft: drilling and casing alone typically runs $2,900–$7,540; a complete system including pump, pressure tank, and hookup typically runs $6,960–$11,600. Actual quotes depend on site access, geology, and casing requirements.
What is the static water level in Gratiot County?
The median static water level is 18 ft below ground surface (middle half of wells: 10 ft–30 ft), from 6,714 measurements.
How much water do wells in Gratiot County produce?
The median tested yield is 40 gpm (middle half: 20 gpm–60 gpm), from 6,765 pump tests. A typical household needs 5–10 gpm.
Pull every recorded well near a Gratiot County address — $19
Drilled depth distribution
Who drills wells in Gratiot County?
Drillers by number of wells completed in this county since 2016, per filed well records (EGLE Wellogic); shown by registered well-driller number.
| Driller | Wells since 2016 |
|---|---|
| Lic. #59-2550 | 426 |
| Lic. #37-2084 | 82 |
| Lic. #59-1975 | 74 |
| Lic. #59-2324 | 60 |
| Lic. #37-2395 | 49 |
| Lic. #19-2056 | 46 |
| Lic. #59-1126 | 41 |
| Lic. #29-1831 | 20 |
Get quotes from local drillers
See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.
Free lookup Property report — $19Well records by ZIP code in Gratiot County
Median depth, water level, and yield for each ZIP code with recorded wells.
- Alma (48801) — 1,244 wells, median 100 ft
- Ithaca (48847) — 1,050 wells, median 126 ft
- Louis (48880) — 989 wells, median 103 ft
- Riverdale (48877) — 711 wells, median 70 ft
- Perrinton (48871) — 647 wells, median 160 ft
- Wheeler (48662) — 548 wells, median 97 ft
- Elwell (48832) — 452 wells, median 89 ft
- Sumner (48889) — 410 wells, median 117 ft
- Ashley (48806) — 352 wells, median 139 ft
- Middleton (48856) — 307 wells, median 95 ft
- Bannister (48807) — 204 wells, median 180 ft
Method: medians computed from Wellogic records (water-supply wells only (household, irrigation, industrial, Type I/II/III public supply) — heat-pump, test and unclassified wells excluded; depths 0–5,000 ft). Cost estimate applies published per-foot ranges (checked 2026-06-11) to the local median depth — full methodology & sources.