Michigan Well Data field records · 2026 survey

Michigan Well Data › Kalkaska County

Kalkaska County, Michigan: well depth, water level & drilling cost

✓ 8,256 Wellogic records · verified 2026-06-29

80 ftmedian well depth
57 ft–117 fttypical depth range
35 ftmedian static water level
20 gpmmedian yield (7,317 tests)

How deep are wells in Kalkaska County, Michigan?

The median drilled well depth in Kalkaska County is 80 ft, based on 8,243 wells with recorded depths in the state Wellogic database. Half of all wells fall between 57 ft and 117 ft; 90% are shallower than 168 ft. Wells drilled since 2016 have a median depth of 87 ft.

How much does it cost to drill a well in Kalkaska County?

Applying published per-foot rates to the local median depth of 87 ft: drilling and casing alone typically runs $2,175–$5,655; a complete system including pump, pressure tank, and hookup typically runs $5,220–$8,700. Actual quotes depend on site access, geology, and casing requirements.

What is the static water level in Kalkaska County?

The median static water level is 35 ft below ground surface (middle half of wells: 16 ft–63 ft), from 8,104 measurements.

How much water do wells in Kalkaska County produce?

The median tested yield is 20 gpm (middle half: 12 gpm–35 gpm), from 7,317 pump tests. A typical household needs 5–10 gpm.

Pull every recorded well near a Kalkaska County address — $19

Drilled depth distribution

0–50 ft 1,327 50–100 ft 3,995 100–150 ft 1,751 150–200 ft 715 200–300 ft 403 300–400 ft 49 400–600 ft 3 600+ ft 0

Who drills wells in Kalkaska County?

Drillers by number of wells completed in this county since 2016, per filed well records (EGLE Wellogic); shown by registered well-driller number.

DrillerWells since 2016
Lic. #05-1914209
Lic. #05-2263164
Lic. #40-2524127
Lic. #57-1943103
Lic. #40-1908102
Lic. #69-252998
Lic. #20-220078
Lic. #40-252975

Get quotes from local drillers

Looking at a specific property in Kalkaska County?

See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.

Free lookup Property report — $19

Well records by ZIP code in Kalkaska County

Median depth, water level, and yield for each ZIP code with recorded wells.

Method: medians computed from Wellogic records (water-supply wells only (household, irrigation, industrial, Type I/II/III public supply) — heat-pump, test and unclassified wells excluded; depths 0–5,000 ft). Cost estimate applies published per-foot ranges (checked 2026-06-11) to the local median depth — full methodology & sources.