Michigan Well Data › Luce County
Luce County, Michigan: well depth, water level & drilling cost
✓ 2,253 Wellogic records · verified 2026-06-29
How deep are wells in Luce County, Michigan?
The median drilled well depth in Luce County is 82 ft, based on 2,237 wells with recorded depths in the state Wellogic database. Half of all wells fall between 60 ft and 115 ft; 90% are shallower than 155 ft. Wells drilled since 2016 have a median depth of 82 ft.
How much does it cost to drill a well in Luce County?
Applying published per-foot rates to the local median depth of 82 ft: drilling and casing alone typically runs $2,050–$5,330; a complete system including pump, pressure tank, and hookup typically runs $4,920–$8,200. Actual quotes depend on site access, geology, and casing requirements.
What is the static water level in Luce County?
The median static water level is 31 ft below ground surface (middle half of wells: 11 ft–58 ft), from 2,168 measurements.
How much water do wells in Luce County produce?
The median tested yield is 15 gpm (middle half: 10 gpm–20 gpm), from 2,030 pump tests. A typical household needs 5–10 gpm.
Pull every recorded well near a Luce County address — $19
Drilled depth distribution
Who drills wells in Luce County?
Drillers by number of wells completed in this county since 2016, per filed well records (EGLE Wellogic); shown by registered well-driller number.
| Driller | Wells since 2016 |
|---|---|
| Lic. #17-1776 | 191 |
| Lic. #17-2658 | 37 |
| Lic. #77-2196 | 30 |
| Lic. #70-2055 | 3 |
| Lic. #48-2119 | 1 |
| Lic. #37-2084 | 1 |
Get quotes from local drillers
See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.
Free lookup Property report — $19Well records by ZIP code in Luce County
Median depth, water level, and yield for each ZIP code with recorded wells.
- Newberry (49868) — 1,296 wells, median 97 ft
- Mcmillan (49853) — 861 wells, median 75 ft
Method: medians computed from Wellogic records (water-supply wells only (household, irrigation, industrial, Type I/II/III public supply) — heat-pump, test and unclassified wells excluded; depths 0–5,000 ft). Cost estimate applies published per-foot ranges (checked 2026-06-11) to the local median depth — full methodology & sources.