Michigan Well Data › Oscoda County
Oscoda County, Michigan: well depth, water level & drilling cost
✓ 5,515 Wellogic records · verified 2026-06-29
How deep are wells in Oscoda County, Michigan?
The median drilled well depth in Oscoda County is 97 ft, based on 5,501 wells with recorded depths in the state Wellogic database. Half of all wells fall between 62 ft and 147 ft; 90% are shallower than 208 ft. Wells drilled since 2016 have a median depth of 102 ft.
How much does it cost to drill a well in Oscoda County?
Applying published per-foot rates to the local median depth of 102 ft: drilling and casing alone typically runs $2,550–$6,630; a complete system including pump, pressure tank, and hookup typically runs $6,120–$10,200. Actual quotes depend on site access, geology, and casing requirements.
What is the static water level in Oscoda County?
The median static water level is 42 ft below ground surface (middle half of wells: 26 ft–80 ft), from 5,416 measurements.
How much water do wells in Oscoda County produce?
The median tested yield is 16 gpm (middle half: 12 gpm–25 gpm), from 5,046 pump tests. A typical household needs 5–10 gpm.
Pull every recorded well near a Oscoda County address — $19
Drilled depth distribution
Who drills wells in Oscoda County?
Drillers by number of wells completed in this county since 2016, per filed well records (EGLE Wellogic); shown by registered well-driller number.
| Driller | Wells since 2016 |
|---|---|
| Lic. #65-2493 | 188 |
| Lic. #35-2137 | 163 |
| Lic. #65-2694 | 89 |
| Lic. #60-1809 | 68 |
| Lic. #65-2548 | 66 |
| Lic. #65-2635 | 41 |
| Lic. #65-1906 | 39 |
| Lic. #60-2357 | 38 |
Get quotes from local drillers
See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.
Free lookup Property report — $19Well records by ZIP code in Oscoda County
Median depth, water level, and yield for each ZIP code with recorded wells.
- Mio (48647) — 2,119 wells, median 107 ft
- Fairview (48621) — 662 wells, median 125 ft
- Luzerne (48636) — 549 wells, median 78 ft
- Comins (48619) — 365 wells, median 97 ft
Method: medians computed from Wellogic records (water-supply wells only (household, irrigation, industrial, Type I/II/III public supply) — heat-pump, test and unclassified wells excluded; depths 0–5,000 ft). Cost estimate applies published per-foot ranges (checked 2026-06-11) to the local median depth — full methodology & sources.