Michigan Well Data › Shiawassee County
Shiawassee County, Michigan: well depth, water level & drilling cost
✓ 14,582 Wellogic records · verified 2026-06-29
How deep are wells in Shiawassee County, Michigan?
The median drilled well depth in Shiawassee County is 140 ft, based on 14,538 wells with recorded depths in the state Wellogic database. Half of all wells fall between 77 ft and 185 ft; 90% are shallower than 230 ft. Wells drilled since 2016 have a median depth of 135 ft.
How much does it cost to drill a well in Shiawassee County?
Applying published per-foot rates to the local median depth of 135 ft: drilling and casing alone typically runs $3,375–$8,775; a complete system including pump, pressure tank, and hookup typically runs $8,100–$13,500. Actual quotes depend on site access, geology, and casing requirements.
What is the static water level in Shiawassee County?
The median static water level is 20 ft below ground surface (middle half of wells: 15 ft–30 ft), from 14,138 measurements.
How much water do wells in Shiawassee County produce?
The median tested yield is 20 gpm (middle half: 10 gpm–30 gpm), from 14,189 pump tests. A typical household needs 5–10 gpm.
Pull every recorded well near a Shiawassee County address — $19
Drilled depth distribution
Who drills wells in Shiawassee County?
Drillers by number of wells completed in this county since 2016, per filed well records (EGLE Wellogic); shown by registered well-driller number.
| Driller | Wells since 2016 |
|---|---|
| Lic. #78-2224 | 238 |
| Lic. #78-1616 | 211 |
| Lic. #78-0189 | 158 |
| Lic. #78-2272 | 146 |
| Lic. #73-2225 | 110 |
| Lic. #78-1607 | 104 |
| Lic. #19-2056 | 74 |
| Lic. #23-2227 | 31 |
Get quotes from local drillers
See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.
Free lookup Property report — $19Well records by ZIP code in Shiawassee County
Median depth, water level, and yield for each ZIP code with recorded wells.
- Owosso (48867) — 3,687 wells, median 160 ft
- Laingsburg (48848) — 2,951 wells, median 200 ft
- Durand (48429) — 1,722 wells, median 102 ft
- Byron (48418) — 1,402 wells, median 69 ft
- Corunna (48817) — 1,223 wells, median 140 ft
- Perry (48872) — 1,087 wells, median 150 ft
- Lennon (48449) — 943 wells, median 150 ft
- Bancroft (48414) — 606 wells, median 83 ft
- Morrice (48857) — 597 wells, median 111 ft
- New Lothrop (48460) — 593 wells, median 110 ft
- Vernon (48476) — 335 wells, median 160 ft
- Henderson (48841) — 266 wells, median 107 ft
- Shaftsburg (48882) — 91 wells, median 200 ft
- Durand (48249) — 89 wells, median 120 ft
Method: medians computed from Wellogic records (water-supply wells only (household, irrigation, industrial, Type I/II/III public supply) — heat-pump, test and unclassified wells excluded; depths 0–5,000 ft). Cost estimate applies published per-foot ranges (checked 2026-06-11) to the local median depth — full methodology & sources.