Michigan Well Data › Tuscola County
Tuscola County, Michigan: well depth, water level & drilling cost
✓ 12,680 Wellogic records · verified 2026-06-29
How deep are wells in Tuscola County, Michigan?
The median drilled well depth in Tuscola County is 180 ft, based on 12,609 wells with recorded depths in the state Wellogic database. Half of all wells fall between 140 ft and 224 ft; 90% are shallower than 275 ft. Wells drilled since 2016 have a median depth of 160 ft.
How much does it cost to drill a well in Tuscola County?
Applying published per-foot rates to the local median depth of 160 ft: drilling and casing alone typically runs $4,000–$10,400; a complete system including pump, pressure tank, and hookup typically runs $9,600–$16,000. Actual quotes depend on site access, geology, and casing requirements.
What is the static water level in Tuscola County?
The median static water level is 20 ft below ground surface (middle half of wells: 10 ft–39 ft), from 12,135 measurements.
How much water do wells in Tuscola County produce?
The median tested yield is 30 gpm (middle half: 19 gpm–40 gpm), from 12,354 pump tests. A typical household needs 5–10 gpm.
Pull every recorded well near a Tuscola County address — $19
Drilled depth distribution
Who drills wells in Tuscola County?
Drillers by number of wells completed in this county since 2016, per filed well records (EGLE Wellogic); shown by registered well-driller number.
| Driller | Wells since 2016 |
|---|---|
| Lic. #79-1805 | 468 |
| Lic. #79-2602 | 301 |
| Lic. #25-2380 | 113 |
| Lic. #79-1865 | 79 |
| Lic. #25-2082 | 51 |
| Lic. #79-2620 | 29 |
| Lic. #44-2007 | 27 |
| Lic. #78-1607 | 17 |
Get quotes from local drillers
See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.
Free lookup Property report — $19Well records by ZIP code in Tuscola County
Median depth, water level, and yield for each ZIP code with recorded wells.
- Vassar (48768) — 2,284 wells, median 160 ft
- Caro (48723) — 2,247 wells, median 210 ft
- Millington (48746) — 2,224 wells, median 183 ft
- Mayville (48744) — 1,472 wells, median 220 ft
- Cass City (48726) — 1,011 wells, median 140 ft
- Fostoria (48435) — 673 wells, median 220 ft
- Kingston (48741) — 563 wells, median 178 ft
- Fairgrove (48733) — 499 wells, median 217 ft
- Unionville (48767) — 449 wells, median 140 ft
- Deford (48729) — 375 wells, median 140 ft
- Silverwood (48760) — 374 wells, median 180 ft
- Reese (48757) — 374 wells, median 165 ft
- Akron (48701) — 259 wells, median 110 ft
- Gagetown (48735) — 155 wells, median 149 ft
Method: medians computed from Wellogic records (water-supply wells only (household, irrigation, industrial, Type I/II/III public supply) — heat-pump, test and unclassified wells excluded; depths 0–5,000 ft). Cost estimate applies published per-foot ranges (checked 2026-06-11) to the local median depth — full methodology & sources.