Michigan Well Data › Wayne County
Wayne County, Michigan: well depth, water level & drilling cost
✓ 1,822 Wellogic records · verified 2026-06-29
How deep are wells in Wayne County, Michigan?
The median drilled well depth in Wayne County is 101 ft, based on 1,814 wells with recorded depths in the state Wellogic database. Half of all wells fall between 75 ft and 134 ft; 90% are shallower than 182 ft. Wells drilled since 2016 have a median depth of 109 ft.
How much does it cost to drill a well in Wayne County?
Applying published per-foot rates to the local median depth of 109 ft: drilling and casing alone typically runs $2,725–$7,085; a complete system including pump, pressure tank, and hookup typically runs $6,540–$10,900. Actual quotes depend on site access, geology, and casing requirements.
What is the static water level in Wayne County?
The median static water level is 31 ft below ground surface (middle half of wells: 17 ft–50 ft), from 1,747 measurements.
How much water do wells in Wayne County produce?
The median tested yield is 20 gpm (middle half: 12 gpm–40 gpm), from 1,613 pump tests. A typical household needs 5–10 gpm.
Pull every recorded well near a Wayne County address — $19
Drilled depth distribution
Who drills wells in Wayne County?
Drillers by number of wells completed in this county since 2016, per filed well records (EGLE Wellogic); shown by registered well-driller number.
| Driller | Wells since 2016 |
|---|---|
| Lic. #81-2014 | 93 |
| Lic. #58-2011 | 33 |
| Lic. #47-1924 | 31 |
| Lic. #47-2428 | 28 |
| Lic. #47-1861 | 18 |
| Lic. #47-0687 | 12 |
| Lic. #47-2284 | 10 |
| Lic. #78-1607 | 8 |
Get quotes from local drillers
See every recorded well near any address — depths, water levels, yields, original driller's logs — in a one-time report.
Free lookup Property report — $19Well records by ZIP code in Wayne County
Median depth, water level, and yield for each ZIP code with recorded wells.
- Canton (48187) — 384 wells, median 99 ft
- Northville (48168) — 326 wells, median 90 ft
- Belleville (48111) — 205 wells, median 100 ft
- Canton (48188) — 129 wells, median 82 ft
Method: medians computed from Wellogic records (water-supply wells only (household, irrigation, industrial, Type I/II/III public supply) — heat-pump, test and unclassified wells excluded; depths 0–5,000 ft). Cost estimate applies published per-foot ranges (checked 2026-06-11) to the local median depth — full methodology & sources.